Schneider Automation Interbus Fiber Optic CommunicationsAdapter Manual de usuario descargar pdf (Pagina 7)

Industrial networking made easy! www.anybus.com

Anybus® is a registered trademark of HMS Industrial Networks AB, Sweden, USA, Germany and other countries. Other marks and words belong to their respecve companies.

All other product or service names menoned in this document are trademarks of their respecve companies.

Communicator RTU

Protocol Modbus RTU Master

Max stations 31 (with RS485/422)

Baud rate 1,2-57,6 kbit/s

Physical standards RS232/422/485

Modbus Commands 0x01 Read Coils, 0x02 Read Discrete Inputs, 0x03 Read Holding Registers,

0x04 Read Input Registers, 0x05 Write Single Coil, 0x06 Write Single Register,

0x07 Read Exception Status, 0x08 Diagnostics, 0x0B Get Comm Event Ctr, 0x0C Get

Comm Event Log, 0x0F Write Multiple Coils, 0x10 Write Multiple Registers, 0x11 Report

Slave ID, 0x14 Read File Record, 0x15 Write File Record, 0x16 Mask Write Register,

0x17 Read/Write Multiple Registers, 0x18 Read FIFO Queue

Customized commands can be created (in the Anybus Conguration Manager)

Technical Details Standard

Weight 150 g, 0,33 lb

Dimensions (L•W•H) 120•75•27 mm, 4,72•2,95•1,06”

Protection class IP20, NEMA rating 1

Enclosure material PC ABS, UL 94

Installation position Any

Mounting DIN rail (35•7,5/15) EN 50022

Certications

UL File number: E203225 UL 508 Ind. Cont. Eq.

Hazardous Locations CLASS 1, DIVISION 2, GROUPS A, B, C AND D, T4 ISA 12.12.01

CE 2004/108/EC EN 61000-6-4

EN 61000-6-2

Electrical Characteristics

Power 24 VDC +/- 10 %

Current consumption Max 300 mA, Typical 100 mA

Hardware Characteristics

Reverse voltage protection Yes

Short circuit protection Yes

Galvanic isolation on subnetwork Yes EN 60950-1

MTTF >550 000 h Telcordia Issue 2, Method

1 Case 3 at 30

Environmental Characteristics

Operating temp 0 to 55

C, 32 to 131

Storage temp -40 to 85

C, -40 to 185

Relative Humidity 0-95 % non condensing

Installation altitude Up to 2 000 m

Immunity and emission for industrial environment

Electrostatic discharge +/- 4 kV EN 61000-4-2

Electro magnetic RF elds 10 V/m 80 MHz - 1 GHz

3 V/m 1,4 GHz - 2,0 GHz

1 V/m 2,0 GHz - 2,7 GHz

EN 61000-4-3

Fast Transients +/- 1 kV EN 61000-4-4

Surge protection +/- 1 kV EN 61000-4-5

RF conducted interference 10 V/rms EN 61000-4-6

Emission (at 10 m) 40 dB 30 MHz - 230 MHz

47 dB 30 MHz - 1 GHz

CISPR 16-2-3

Single Pack Accessories

• Resource CD • Conguration Cable (RS232) Port • Installation sheet • Dsub with screw terminals for subnetwork

TECHNICAL SPECIFICATIONS

HMS Industrial Networks - Worldwide

HMS - Sweden (HQ)

Tel : +46 (0)35 17 29 00 (Halmstad HQ)

Tel: + 46 (0)35 17 29 24 (Västerås ofce)

E-mail: sales@hms-networks.com

HMS - China

Tel : +86 (0)10 8532 3183

E-mail: cn-sales@hms-networks.com

HMS - Denmark

Tel: +45 35 38 29 00

E-mail: [email protected]

HMS - France

Tel: +33 (0)368 368 034

E-mail: [email protected]

HMS - Germany

Tel: +49 (721) 989 777-000

E-mail: ge-sales@hms-networks.com

HMS - India

Tel: +91 20 40111201

E-mail: in-sales@hms-networks.com

HMS - Italy

Tel : +39 039 59662 27

E-mail: [email protected]

HMS - Japan

Tel: +81 (0)45 478 5340

E-mail: jp-sales@hms-networks.com

HMS - UK

Tel: +44 (0) 1926 405599

E-mail: [email protected]

HMS - United States

Tel: +1 312 829 0601

E-mail: us-sales@hms-networks.com

NETWORK SPECIFIC FEATURES

1 = Network connector, 2 = Baud rate,

3 = I/O data, 4 = Other

Power connector

with screw terminals

Status LEDs

Conguration switches

(if existing, behind lid)

Network connector

(see number 1 above)

DIN rail connector

Conguration port

RTU subnetwork

connector (DSUB 9-Pole

female)

CANopen

1 = DSUB9M 2 = Up to 1 Mbit/s

3 = 512 byte IN/OUT 4 = Supports prole CIA DS301 V4.02

CC-Link

1 = 1*5p; 5.08 Phoenix Plug 2 = Up to 10 Mbit/s

3 = 128 IO points, 16 word IN/OUT 4 = Up to 4 occupied stations

ControlNet

1 = 2*BNC Coax + RJ45 (NAP) 2 = 5 Mbit/s

3 = 450 byte IN/OUT 4 = Communications adapter, prole n. 12

DeviceNet

1 = 1*5p; 5.08 Phoenix Plug 2 = 125-500 kbit/s

3 = 512 byte IN/OUT 4 = Communications adapter, prole n. 12

EtherCAT

1 = 2*RJ45 2 = 100 Mbit/s

3 = 512 byte IN/OUT 4 = DS301 V4.02 compliant, 4 FMMU Channels

EtherNet/IP

1 = RJ45 2 = 10/100 Mbit/s 3 = 512 IN/OUT

4 = EtherNet/IP group 2 and 3 server. Modbus/TCP slave functionality

FIPIO

1 = DSUB9M 2 = 1 Mbit/s 3 = 32 words IN/OUT (cyclic)

4 = Data exchange according to FIPIO Extended Device Prole, Class 0

Interbus

1 = DSUB9F + DSUB9M 2 = 500 kbit/s, 2 Mbit/s

3 = 20 byte IN/OUT (process data), 512 bytes IN/OUT (with PCP)

4 = Interbus PCP V.2.0

Modbus Plus

1 = DSUB9F 2 = 1,2-57,6 kbit/s

3 = 32 words IN/OUT (global data), 512 words IN/OUT (register data) 4 = -

Modbus RTU

1 = DSUB9F 2 = 1,2-57,6 kbit/s 3 = 512 byte IN/OUT 4 = RS232 and RS485

Modbus TCP

1 = RJ45 2 = 10/100 Mbit/s 3 = 512 byte IN/OUT

4 = Class 0, 1 and partially class 2 slave functionality

Probus

1 = DSUB9F 2 = Up to 12 Mb

3 = 244 IN/OUT (416 total) 4 = Probus DP (IEC 61158)

Pronet IO

1 = RJ45 2 = 100 Mbit/s 3 = 512 byte IN/OUT

4 = RT Communication and Cyclic data exchange

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comentarios a estos manuales

Sin comentarios

Schneider Automation Interbus Fiber Optic CommunicationsAdapter Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Schneider Automation Interbus Fiber Optic CommunicationsAdapter