Schneider Automation Modicon Quantum Ethernet Guía de usuario Pagina 511

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 900
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 510
I/O Modules
35013379 02 October 2007 511
I/O Map Register
Assignments-
Register 17
The following figure shows the status warnings for register 17.
I/O Map Status
Byte
I/O map status byte is used as follows:
Modsoft Module
Zoom Selections
Push <Enter> to display and select the channel range.
140ARI03010 The following information pertains to configuration of the 140ARI03010 Analog Input
module.
Input Status WordRegister 17
1 = Broken wire (4 ... 20 mA only) on channel 13
1 = Broken wire (4 ... 20 mA only) on channel 14
1 = Broken wire (4 ... 20 mA only) on channel 15
1 = Broken wire (4 ... 20 mA only) on channel 16
1234567 10 11 12 13 14 15 1689
1 = Broken wire (4 ... 20 mA only) on channel 8
1 = Broken wire (4 ... 20 mA only) on channel 7
1 = Broken wire (4 ... 20 mA only) on channel 6
1 = Broken wire (4 ... 20 mA only) on channel 5
1 = Broken wire (4 ... 20 mA only) on channel 9
1 = Broken wire (4 ... 20 mA only) on channel 10
1 = Broken wire (4 ... 20 mA only) on channel 11
1 = Broken wire (4 ... 20 mA only) on channel 12
1 = Broken wire (4 ... 20 mA only) on channel 4
1 = Broken wire (4 ... 20 mA only) on channel 3
1 = Broken wire (4 ... 20 mA only) on channel 2
1 = Broken wire (4 ... 20 mA only) on channel 1
Note: The broken wire detect is set at 2.0 mA.
1 = Broken wire (4 ... 20 mA only)
12345678
4 to 20mA 0 to 16,000
4 to 20mA 0 to 4095
4 to 20mA 0 to 20,000
0 to 25mA 0 to 25,000
Channel X range selection:
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com
Vista de pagina 510
1 2 ... 506 507 508 509 510 511 512 513 514 515 516 ... 899 900

Comentarios a estos manuales

Sin comentarios