Schneider Automation Interbus Fiber Optic CommunicationsAdapter Información técnica descargar pdf (Pagina 5)

www.anybus.com www.anybus.com

8 9

Anybus Communicator RTU

Features and benets

• When converng the Modbus RTU protocol, the Communicator

acts as Master on the serial network

• Predened 6-step Modbus RTU conguraon wizard

• Enables any automaon device with a serial RS-232/422/485

Modbus RTU Slave interface to parcipate on a network

• No hardware or soware changes are required for the connected

automaon device

• Compable with all Allen Bradley and Guard PLCs

• Complete protocol conversion performed by the Communicator,

no PLC funcon blocks required

• Save/Load funcon means a completed conguraon can be reused

for many other installaons

• CE,

and HazLoc cercaons

• Global free technical support and consultancy

• Conguraon video available on www.anybus.com

Anybus

Communicator™ - Protocol converter gateways

Proven and trusted

The Anybus Communicator has been

safely connecng devices to Rockwell

Automaon networks and systems for

over 10 years.

Its exibility means that it is used in

a wide variety of industries such as

factory automaon, mining, waste

water management, Infrastructure

Building and HVAC and many more.

With the Anybus Communicator,

your devices are connected fast. Its

unrivalled performance, exibility and

reliability gives you the

peace of mind you

need when solving

your connecvity

problems.

Niklas Selander

Product Manager -

Anybus

Gateways

Order information

Network: PartNo:

ControlNet AB7006

DeviceNet AB7001

EtherNet/IP 2-port AB7072

*See page 53 for mechanical and technical

specicaons

Optional accessories

USB-RS232 conguraon adapter

Part No: 019570

Converting from Modbus RTU protocols to

ControlNet, DeviceNet and EtherNet/IP

Anybus

Communicator™ - Protocol converter gateways

Anybus Communicator DF1

Converting from DF1 protocols to ControlNet,

DeviceNet and EtherNet/IP

The Communicator DF1 is used to enable non-networked

automaon devices to parcipate on DeviceNet,

ControlNet and EtherNet/IP.

With its selectable serial RS-232/422/485 interface, the

Communicator converts the DF1 protocol and enables

devices such as Rockwell Automaon/Allen Bradley PLC-5

and SLC-500 among others, to parcipate on the network

without the need for extensive PLC funcon blocks.

Network specic features

1 = Network connector, 2 = Baud rate, 3 = I/O data, 4 = Other

When to use

Integrates non-networked devices

and machines with a serial

RS-232/422/485 interface to a

DeviceNet/ControlNet or

EtherNet/IP PLC control system.

Conguration

As the most common serial

Modbus RTU interface is used,

HMS takes away the hassle

of scripng and serial frame-

building by using an easy 6-step

visual conguraon wizard that

contains predened Modbus RTU

commands.

ControlNet

1 = 2*BNC Coax + RJ45 (NAP)

2 = 5 Mbit/s 3 = 450 byte IN/OUT

4 = Communications adapter, prole

n. 12

DeviceNet

1 = 5*5.08 PLUG 2 = 125-500 kbit/s

3 = 512 byte IN/OUT

4 = Communications adapter, prole

n. 12

EtherNet/IP

2-port

1 = 2*RJ45 2 = 10/100 Mbit/s

3 = 512 IN/OUT

4 = EtherNet/IP group 2 and 3 server

APPLICATION EXAMPLE SINGLE-DROP APPLICATION EXAMPLE MULTI-DROP

CompactLogix

DeviceNet Network

Communicator RTU

DeviceNet

Modbus RTU

via RS-232

Example: Kinec 3 servo drive with

a serial Modbus RTU interface

ControlLogix

EtherNet/IP Network

Communicator RTU

EtherNet/IP

Modbus RTU via RS-485/422

Example: Connects up to 31 PF4 drives via RS-485

APPLICATION EXAMPLE SINGLE-DROP APPLICATION EXAMPLE MULTI-DROP

Communicator

EtherNet/IP

DF1 via RS-232

Example: Allen Bradley SLC500

with a serial DF1 interface

ControlNet Network

Communicator

ControlNet

DF1 RS-485/422

Example: Connecng PLC5s via RS-485

Features and benets

• When converng the DF1 protocol the Communicator acts as a

DF1 Half Duplex Master on the serial network

• Enables any automaon device with a serial RS-232/422/485 DF1

interface to parcipate on a network

• No hardware or soware changes are required for the connected

automaon device

• Compable with all Allen Bradley and Guard PLCs

• Complete protocol conversion performed by the Communicator,

no PLC funcon blocks required

• Save/Load funcon means a completed conguraon can be reused

for many other installaons

• CE,

and HazLoc cercaons

• Global free technical support and consultancy

• Conguraon video available on www.anybus.com

When to use

Integrates non-networked devices

and machines with a serial

RS-232/422/485 interface to a

DeviceNet/ControlNet or

EtherNet/IP PLC control system.

HMS takes away the hassle

of scripng and serial frame

building by using an easy visual

conguraon that allows for the

easy generaon of DF1 scan lists.

Tech tip

Using the Communicator to

connect to serial devices

eliminates the need for a serial

opon card and the need for

complex funcon block

programming.

Furthermore, as the

Communicator is not restricted

to the length of a serial cable, it

can be installed almost anywhere

within the installaon.

With its intelligent internal data

mapping system, the

Communicator enables even very

slow devices to parcipate on the

network without any performance

restricons.

Using the Rockwell Automaon Integrated Architecture

Builder (IAB), engineers can integrate the Communicator

making it easy to include in your network system design.

ControlLogix

Order information

Network: PartNo:

ControlNet AB7006

DeviceNet AB7001

EtherNet/IP 2-port AB7072

*See page 53 for mechanical and technical

specicaons

Optional accessories

USB-RS232 conguraon adapter

Part No: 019570

Network specic features

1 = Network connector, 2 = Baud rate, 3 = I/O data, 4 = Other

ControlNet

1 = 2*BNC Coax + RJ45 (NAP)

2 = 5 Mbit/s 3 = 450 byte IN/OUT

4 = Comm adapter, prole n. 12

DeviceNet

1 = 5*5.08 PLUG 2 = 125-500 kbit/s

3 = 512 byte IN/OUT

4 = Communications adapter,

prole n. 12

EtherNet/IP

2-port

1 = 2*RJ45 2 = 10/100 Mbit/s

3 = 512 IN/OUT

4 = EtherNet/IP group 2 and 3 server

EtherNet/IP Network

CompactLogix

With the Anybus Communicator RTU you can connect a non-

networked device to any major eldbus or industrial Ethernet

network. The Communicator handles the complete Modbus

RTU serial protocol without the need for extensive PLC

funcon blocks.

The Communicator RTU has a selectable serial RS-232/422/485

interface making it possible to connect one or mulple devices

using just one Communicator. This compact gateway

consumes very lile space in a cabinet and is easily

mounted on a standard DIN rail.

PROTOCOL CONVERTER GATEWAYS

Using the Rockwell Automaon Integrated Architecture

Builder (IAB), engineers can integrate the Communicator

making it easy to include in your network system design.

1 2 3 4 5 6 7 8 9 10 ... 30 31

Comentarios a estos manuales

Sin comentarios

Schneider Automation Interbus Fiber Optic CommunicationsAdapter Información técnica Pagina 5

Comentarios a estos manuales